|
The Motorized Pressure Control (MPC) uses the same DC drive system as the MFC to operate a direct acting pilot valve.
This system offers a simple, low-cost method of achieving electric remote control of system pressure in all types of hydraulic systems.
Source Fluid Power offers two versions of the valve; both fit a generic 10-2 cavity.
 |
| P10_ _ _ _ (generic 10-2) |
 |
|
The pilot operated version incorporates a pilot relief and second stage to control pressures from
150-3000 psi (1-200 Bars) at flows up to 15 GPM.
The direct acting pilot version controls pressures from 500 to 5000 psi (35-350 Bars) at flows of less than 1.5 GPM. This valve is typicallly used as a remote pilot for large relief valves, or pressure limiters on pumps.
S P E C I F I C A T I O N S
DESCRIPTION
The P-10 motorized relief valves are cartridge valves and fit a generic 10-2 cavity.
OPERATING PRESSURE
0-1500 psi P10-15-**
400-3000 psi P10-30-**
500-5000 psi P10-50-**
FLOW RATING
15 GPM P10-15 & P10-30
1.5 GPM P10-50
OPERATING SPEED
3.5 seconds (-03 option)
7 seconds (-07 option)
24 seconds (-24 option)
48 seconds (-48 option)
VOLTAGE
12V DC
For 24V DC operation, add 100-ohm resistor in series with motor
CURRENT DRAW
Less than 120 MA typical @ 12V DC
CARTRIDGE WEIGHT
1.5 lb.
CONSTRUCTION
Nose and body are plated steel
Exposed parts plated
Motor canister is anodized aluminum
|
